
Display-Modul¶
76 × 40 × 28 mm | 70g

Power: 7-36 Volt DC
The simplest version has 6 wires
| + 7 to 36V |
|---|
| GND |
| Tally IN |
| Photodiode IN |
| Ext. LED OUT 1 |
| Ext. LED OUT 2 |
Power, Tally-IN, Photodiode-IN,LED-OUT have the same ground
All wiring is done externally; all necessary documentation and electronic components are included.
If the type of input is known—voltage or short circuit—the components are already installed inside the housing. A schematic will be included.
It is secured using the two small tabs on the side, either with cable ties or two screws. This display also has a threaded socket for a camera tripod built into the lid.
Lemo Version in construction, that will end up being a little bigger