Differences

This shows you the differences between two versions of the page.

--- srt_connection_manual [2022/07/01 08:16] – [receiver side] peteraellig
+++ srt_connection_manual [2023/10/20 19:45] (current) – external edit 127.0.0.1
@@ Line 19: / Line 19: @@
 **THIS COMPUTER WILL BE THE LISTENER, for sending and receiving SRT**\\
-{{::s1.png?800|}}\\
+{{::srt1.png?800|}}\\
-  *the IP address of your computer after the router, in my case 192.168.10.102
+  *the IP address of your computer after the router, in my case 10.10.10.52
   *An open UDP port in your router that allows connection to your computer through your router's firewall. [[https://en.wikipedia.org/wiki/Port_forwarding|wiki Port_forwarding.]]
   *In our example we forward the UDP addresses 52001and 52002. You need one open port per SRT connection (inbound AND outbound)\\
   *In our example we use vixVMIX on both sides, at least version 23.0.0.31 The HD version for 60$ should work.\\
-{{::s2.png?600|}}\\
+{{::srt2.png?600|}}\\
 Consult your router's manual on how to set up UDP port forwarding. With my router it looks like this\\
 On most Routers you can choose port forwarding for TCP or UDP or both. Choose UDP or both.\\
@@ Line 48: / Line 48: @@
 **in vMix, add Input**\\
 {{::s5.png?700|}}\\
-  *Stream Type: SRT Listener and the SAME port, you have choosen on the sender side, and your Router is forwarding this port to your computers IP (in this example 192.168.10.102)
+  *Stream Type: SRT Listener and the SAME port, you have choosen on the sender side, and your Router is forwarding this port to your computers IP (in this example 10.10.10.52)
   *Start using H264 codec with 1.5 mbps. NO HARDWARE ENCODING\\