Differences

This shows you the differences between two versions of the page.

--- countdown_timer_in_vmix [2023/10/22 14:13] – peteraellig
+++ countdown_timer_in_vmix [2023/10/27 08:48] (current) – peteraellig
@@ Line 1: / Line 1: @@
 ===== CountDown Timer =====
-There are countless ways to implement a countdown timer in vMix. But if you want a timer that changes color at certain times, displays an end text or counts up the overtime at 0, then here is a solution suggestion. Apart from vMix, nothing else is needed. In the end, the solution consists of 2 keyboard shortcuts and a script. The script generates its own timer. The variables in the script can be adjusted relatively easily. Since the script starts counting down immediately after starting, it needs another keyboard shortcut that resets the initial display. So if you change the countdown time, you have to change the script and the reset keyboard shortcut. In the following I try to describe this process.
+Attention: this timer works only from vMix version 27. Must have something to do with the NET version somehow.\\
+There are countless ways to implement a countdown timer in vMix. But if you want a timer that changes color at certain times, displays an end text or counts up the overtime at 0, then here is a solution suggestion. Apart from vMix, nothing else is needed. In the end, the solution consists of 2 keyboard shortcuts and a script. The script generates its own timer. The variables in the script can be adjusted relatively easily. Since the script starts counting down immediately after starting, it needs another keyboard shortcut that resets the initial display. If you change the countdown time, you have to change the script. In the following I try to describe this process.
   * 1. Create a keyboard shortcut, e.g. with the letter "R" (for reset), to stop the script Countdown (just in case it is still running) Set the Local Script checkbox to true.\\
 {{::r1.jpg?600|}}\\
   * 2. Create an second keyboard shortcut, with the same letter as in point 1 ("R"), to which you assign the Setcolor function, as described in the picture below. This serves to reset the background, if it still shows the color for overtime, to black. Set the Local Script checkbox to true.\\
 {{::r2.jpg?600|}}\\
-  * 3. In the third shortcut, again with the same letter as the previous two shortcuts ("R"), this shortcut sets the text display to the start time of the countdown. e.g. 1 minute, as shown in the sample image below. Set the Local Script checkbox to true.\\
+  * 3. In the third shortcut, again with the same letter as the previous two shortcuts ("R"), this shortcut sets the text display to the start time of the countdown. e.g. 1 minute, as shown in the sample image below. The display gets the value from Dynamic Value1, this is a local variable of vMix. The value is set in the script when the countdown has been started once. So if you change the time in the script, it will be automatically set to the new value on shortcut reset.\\
 {{::r3.jpg?600|}}\\
   * 4. Create a fourth shortcut, e.g. with the letter "S" (for start) , assign the function ScriptStart to the shortcut, as shown in the picture below. Pay attention to correct upper-lower case Set the Local Script checkbox to true.\\
@@ Line 32: / Line 33: @@
 'Please change only the numbers or the colors in the quotes!
 'Timer length in minutes and seconds
-Dim timerLengthMinutes As Integer = 1
+Dim timerLengthMinutes As Integer = 20
-Dim timerLengthSeconds As Integer = 00
+Dim timerLengthSeconds As Integer = 30
 'Warning time 1 in minutes and seconds
@@ Line 67: / Line 68: @@
 Dim currentTime As DateTime
 API.Function("SetColor",Input:= title ,SelectedName:= "background.Fill.Color",Value:="#FF0000")
+'put countdowntime in a dynamic value for resetting the timer
+API.Function("SetDynamicValue1", Value:=  timerLengthMinutes.tostring("00") + ":" + timerLengthSeconds.tostring("00"))
 Do
@@ Line 96: / Line 101: @@
 Dim timeLeft As TimeSpan = endTime - currentTime
 'option timedisplay in console
-Console.WriteLine("Remaining Time: " & timeLeft.ToString("mm\:ss"))
 'time display in vMix
+if  timeLeft.Tostring("hh") > "00" then
+Console.WriteLine("Remaining Time: " & timeLeft.ToString("hh\:mm\:ss"))
+API.Function("SetText",Input:= Title ,SelectedName:= Textfield ,Value:= timeLeft.ToString("hh\:mm\:ss"))
+else
+Console.WriteLine("Remaining Time: " & timeLeft.ToString("mm\:ss"))
 API.Function("SetText",Input:= Title ,SelectedName:= Textfield ,Value:= timeLeft.ToString("mm\:ss"))
+end if
 'waits 200 miliseconds
 sleep(200)
 Loop While True
 </code>\\
-Finally, load the title into your vMix as used in the example. You can download the title here. I have also provided the whole thing as a bundle for download.\\
+Finally, load the title into your vMix as used in the example. You can download the title here. I have also provided the whole thing as a bundle for download or the preset alone, which already contains the shortcuts and the script.\\
-[[https://drive.google.com/drive/folders/1RCPeVAT2pn6_bUIcyIraPslHpNzgtL6d?usp=sharing|download Title, Preset or Bundle]]
+Loading with the Bundle option includes everything and also loads scripts and shortcuts.\\
+[[https://drive.google.com/drive/folders/1RCPeVAT2pn6_bUIcyIraPslHpNzgtL6d?usp=sharing|download Title, Preset or Bundle]]\\
+\\
+DynamicValue also makes it easy to adjust the countdown times. With a streamdeck pad you could enter different times in Dynamicvalue and the script could then take the coutdown time from there.